The curved pipe pressure balanced corrugated compensator is installed at the bend of the pipeline or on the space pipeline connected to the equipment. It can compensate for axial displacement and lateral displacement without generating internal pressure thrust on the pipeline system or other equipment. Metal expansion joints are often used in pumps, compressors, turbines and other load-sensitive piping systems, and can absorb vibration and reduce noise to ensure safe operation of equipment. . After the on-site installation of the metal expansion joint is completed, the small tie rod must be removed. 1. Product structure:
The curved tube pressure balanced bellows compensator has two working bellows at the front (channel end) and a balancing bellows at the rear (balanced end). When the bent tube produces lateral displacement, the spherical nut on the large tie rod rotates around the spherical washer. At the same time, the large tie rod bears the internal pressure thrust. The two working bellows at the channel end of the compensator can compensate for the lateral displacement produced by the curved pipe section, and the balancing bellows at the balancing end can compensate for the axial displacement of the straight pipe section.
2. Model: produced by our factory - pressure level
3. Connection method: flange connection. pipe connection
4. Lateral compensation amount: according to customer requirements
5. Pressure Range:
6. Temperature range: ℃
7. Diameter range:
8. Fatigue life: times
Curved tube pressure balanced corrugated compensator (BHQP type)